Stone and tile
Worktops with their cut-outs, edge profiles and slab layouts, quoted from the drawing.
Worktops, vanity tops, splashbacks and tiling, cut on a saw or a water-jet: slabs with their cut-outs and grooves, inlays, and tile layouts with the whole and cut tiles counted.
What you can design
4 parametric designs come in the library's Stone and tile folder (File › Run Parametric…): open one, type your sizes and the drawing follows. Open any of them in the viewer to try it.
The trade's tools
For a drawing whose industry is Stone and tile, the toolbar and Edit › Tool offer these tools beside the general drawing, editing and dimensioning tools. Each is parametric: change a size, or move a point it was drawn on, and what it made follows.
Hole Pattern
Holes on a bolt circle (PCD), in a row or in a grid, measured from an edge.
On the toolbar's Holes button
Lead-in and lead-out
A lead-in and lead-out in the waste, where a closed cut starts and ends.
Room Outline
A room from its wall lengths and turns.
Edge allowance
A glass or stone panel's cutting size, oversize for the edge work.
On the toolbar's Allowance button
Fitting notch
A hinge or clamp notch in an edge, its inner corners rounded.
On the toolbar's Notch button
Corners
A panel's corners rounded, clipped (dubbed) or notched.
Cut-out
A sink, hob or socket cut-out, or a tap hole, set back from an edge.
Tile setting-out
Whole and cut tiles over an area, counted.
Drainer grooves
A draining board's grooves.
Water-jet inlay
An inlay's piece and its opening, with a fit clearance.
Edge Profile
Marks a worktop's finished edges with their profile, from polished to ogee or waterfall, for the stone quote.
Slab Photo
Squares a photo of a slab to its true size from its four corners, so the pieces can be laid out over its veins.
Exports
File › Export › Export… lists these formats first for a Stone and tile drawing:
And the formats every trade uses:
Machine profiles
File › Send Using Machine Profile sends the drawing to a machine in one click, with the format, options, layer names and pens it needs. These come with the app:
-
CNC router (DXF, depth in the layer names)
DXF and DWG
CNC routers through Vectric, Alphacam, Enroute, Fusion or the machine's CAM
-
Emulator: CNC (G-code)
G-code
ParametrIQ machine emulator
-
Waterjet (DXF, cut and etch)
DXF and DWG
Waterjets through OMAX Intelli-MAX, Flow FlowXpert / FlowCut, KMT or the machine's CAM
Reports
File › Reports… works these out from the drawing, to save as a web page or as CSV:
-
Stone quote
A stone job's price.
Design rules
File › Check Design, and every machine export, checks a Stone and tile drawing against these rules:
-
Cut-outs too near glass and stone edges
A cut-out (a closed shape inside the panel that isn't a hole) with less glass between it and the panel's edges than half its width to its left and right, or half its height above and below it. In Stone and tile: a cut-out with less than 50 mm (2 in) of stone round it.
-
Holes too near glass and stone edges
A hole (a round hole, or a slot: two half circles joined by straight sides, as one polyline or as lines and arcs) whose edge comes nearer an edge (its panel's, or a notch's or cut-out's) or another hole's edge than twice the panel's thickness (the drawing's T, or 6 mm, 0.25 in), or nearer a corner (the panel's, or a notch's or cut-out's inner one) than six times the thickness, or a hole smaller across (a slot: its width) than the panel is thick. A rounded corner is measured from where its sides would meet. Fix it moves a hole too near an edge straight away from it.
-
Sharp inner corners in glass and stone
An inner corner (a notch's, a cut-out's, or the panel's own, as in an L shape) that is sharp, or rounded tighter than the panel allows: in glass, its thickness and at least 10 mm (0.375 in); in stone, 10 mm (0.375 in). Arcs and a polyline's bulges count as rounded corners.
Read more
The help's page for the trade describes each tool, design, report and export in full.
Other trades
Get ParametrIQ CAD
Included in every plan. Install it, activate it, and start with File › New or File › Run Parametric…